Outlaw Hobby Products Recommendations:
.61-.91 size control surfaces. Great 3D Servo for strength and decent speed. Will take a good amount of abuse. A good digital servo for the price. Has higher torque than the HS5625MG but slower speed.
See our Servo Reference Chart for comparisons and specifications to help you choose a servo.
Performance Specifications:
| |
4.8 Volt |
6.0 Volt |
7.4 Volt |
| Battery Voltage Approvals^: |
Yes |
Yes |
No |
| Speed: |
0.23 |
0.18 |
N/A |
| Torque oz./in. |
143 |
168 |
N/A |
(^This approval is not official. Consult manufacturer specifications for voltage and performance certifications.)
General Specifications:
| Analog/Digital: |
Digital |
| Performance Type: |
High Torq |
| Gears: |
Metal |
| Size Type: |
Standard |
| Motor Type: |
3 Pole |
| Bearing Type: |
Dual BB |
| Size in Inches: |
1.59 x 0.77 x 1.48 |
| Size in MM: |
41 x 20 x 36 |
| Weight in ounces: |
2.11 |
| Weight in grams: |
37.2 |
Specifications from Hitec USA:
This is the S5645 Super Torque, Metal Gear for airplane, car and boat Use and Comes with "J" Connector Pre-Installed.
FEATURES: Works with fixed wing aircraft and helicopters up to 40 pounds, 1/10th and 1/8th on- or off-road vehicles.
INCLUDES: One digital high torque servo with 12" wire and S/JR/Air-Z connector, One white small X-shaped servo horn, One red Large X-shaped servo horn, One white adjustable servo horn, One white offset straight servo horn, One white disc servo horn, One blue anodized, heat treated servo arm horn, Four 2 x 14mm mounting screws, Four brass eyelets, Four black rubber vibration isolators.
SPECS: Speed: 0.23 sec/60° at 4.8V Speed: 0.18 sec/60° at 6.0V Torque: 143.03 oz-in at 4.8V Torque: 164.2 oz-in at 6V Length: 1.59" (40.6mm) Width: 0.77" (19.8mm) Height: 1.48" (37.8mm) Weight: 2.11oz (60g)
COMMENTS: Programming the Fail-Safe: In order to program the Fail-Safe on this servo. Modeler will need to purchase the Hitec Field Programmer. The metal servo horn will fit any Hitec servos that have a "+" stamped on top of the output shaft.
